Fenton Chemicals

• Purity
• Longer shelf life
• Odorless

• Neem oil and Karanj oil are extensively used in agriculture as eco-friendly insecticide and fungicide
• Since these oils widely vary in composition depending on the geography and method of extraction, only our company provides single component emulsifier that can serve all types of oil due to our in depth reasearch and development
• This single component emulsifier offers complete flexibility to match all compositions of neem oil & Karanj oil and many other oils

• The total dosage of our emulsifier for Karanja oil based formulations is 5-10% depending on the type of oil and concentration of EC required

• Appearance: Pale Yellow to Brown Liquid
• Solubility: Soluble in most oils and organic solvents

• Take 88-90 kg. Karanja Oil which must be free from foreign impurities and free from mud and should be filtered with filter cloth or mud settled oil
• Now add 8-10 kg of our emulsifier DIKO EKO slowly under stirring
• Continue stirring for 10-15 minutes. You will get transparent clear emulsion

• Many formulations incorporate Kerosene or MTO as solvents to obtain desired compositions e.g. Butachlor, chloropyriphos etc. They are also used as solvents in paints industry .
• In present competitive world it is also desired to replace more expansive solvent like c9, aromax etc.
• Fenton Chemicals has developed a emulsifier extensively used for Emulsification of Kerosene and MTO used for various applications.
• We have developed a single component emulsifier DIKO KMT 20 for emulsification of Kerosene and MTO .

Note: Single component non Ionic Emulsifier for Emulsification of Kerosene and MTO used for various formulations as solvents.

Dose: The total dose of DIKO KMT20 is recommended as 4 - 8% w/w of the formulation.

Application:

• Prepare a blank solution incorporating desired toxicant, solvent, stabilizer etc, without the emulsifier. Add DIKO KMT5 to the above solution .
• The dose of the combination is decided based on the desired stability of the emulsion in water.

Additional Information:

• Production Capacity: 50,000 Kg/ Month
• Delivery Time: 3-5 Days

• Pure
• Long shelf life
• Air tight packaging

• Active content: Propreitory
• Solubility: Soluble in most oils and organic solvents.

• Take 20 kg Silicone Oil
• Now add 10 kg of our emulsifier DIKO SOL50 slowly under stirring.
• Continue stirring for 10-15 minutes.
• Now add 70 Kg of water slowly ( only 5-10 Kg at once ) while continuous stirring.

Additional Information:

• Production Capacity: 10,000 Kg per day
• Delivery Time: 2 Days

• Fenton Chemicals has developed a special Amino Silicone Oil Emulsifier (FX AMS 80) which gives much better stable emulsion at very low dosage as compared to the conventional emulsifiers .
• It is very easy to make Amino Silicone Emulsion using our Emulsifier FX AMS 80. The stability of our emulsifier AMS 80 is very good and it does not separates out with temperature .

• Take 25 kg Amino Silicone Fluid.
• Now add 12 kg of our emulsifier FX AMS 80 to the above fluid and mix well with a stirrer till all the emulsifier is mixed in the fluid and a thick paste is formed.
• Now slowly add water step by step at 2-5 litres per minute upto 100 litres .
• If the solution is little hazy , add a very little amount of acetic acid till the solution becomes clear .
• The Emulsion formed will have good thickeness and will be clear and transparent in appearance.
• This process of making amino silicon fluid emulsion is much easier and cheaper than the conventional ways.

• Acetic acid should only be added to make the solution clear .
• The above process should be followed very strictly.
• Take soft water for longer stability of the product.

Additional Information:

• Production Capacity: 5000 Kgs per day
• Delivery Time: 2-4 Days

FX EPGR is a non-ionic emulsifier for animal feed. The product has a strong emulsification capacity and is especially suitable for oil based feed formulations . 

Benefits

• Flexible application options
• Mixes well with water, fats and oils
• Mixes homogeneously

• Pure
• Long shelf life
• Air tight packaging

• Active content: Propreitory
• Appearance: Pale Yellow to Brown Liquid.
• Solubility: Soluble in most oils and organic solvents.

• Take 90-92 kg Solvent C9 /Aromax /Remax
• Now add 8-10 kg of our emulsifier DIKO EC9 R slowly under stirring.
• Continue stirring for 10-15 minutes.
• You will get transparent clear emulsion.

Additional Information:

• Production Capacity: 10,000 Kg per Day
• Delivery Time: 2 Days

• Pure
• Long shelf life
• Air tight packaging

• Active content: Propreitory
• Appearance: Pale Yellow to Brown Liquid.
• Solubility: Soluble in most oils and organic solvents.

• Take 90-92 kg Kerosene
• Now add 8-10 kg of our emulsifier DIKO KMT 20 slowly under stirring .Continue stirring for 10-15 minutes.
• You will get transparent clear emulsion.

Additional Information:

• Delivery Time: 2 Days

• Purity
• Stability
• Long shelf life

• Active content: Blend of Non Ionic Emulsifiers
• Appearance: pale yellow to brown liquid.
• Solubility: soluble in most oils and organic solvents.
• Insoluble in water.
• Non-volatilesat100oc: 50-75%

• The total dose of DIKO LLP is 5-10 % depending on the stability of the emulsion required.

• Pure
• Long shelf life
• Air tight packaging

• Active content: Propreitory
• Appearance: Pale Yellow to Brown Liquid.
• Solubility: Soluble in most oils and organic solvents.

• Take 90-92 kg Soyabean Oil Now add 8-10 kg of our emulsifier DIKO SOY65 slowly under stirring .
• Continue stirring for 10-15 minutes.
• You will get transparent clear emulsion.

Additional Information:

• Production Capacity: 10,000 Kgs per Day
• Delivery Time: 2 Days

• Wetting Agents
• Detergents
• Penetrant
• Dispersant
• Emulsifer

• Pure
• Long shelf life
• Air tight packaging

• Active content: Proprietory
• Appearance: Pale Yellow to Brown Liquid.
• Solubility: Soluble in most oils and organic solvents.

• Take 25 kg Carvacrol then add 60 Kg of Canola Oil to it.Finally add 15 kg of our emulsifier DIKO CVC25 slowly under stirring .
• Continue stirring for 10-15 minutes.You will get transparent clear emulsion.

Additional Information:

• Item Code: DIKOCVC25
• Production Capacity: 10,000 Kg per day
• Delivery Time: 2 Days

We are a leading manufacture of Emulsifier for Pine Oil. It a very unique product manufactured by us much better than the already existing emulsifiers in the market. Our Pine Oil Emulsifier gives an clear stable concentrate and a thick milky white stable emulsion when mixed with water. Pine oil emulsifier is mixed with Pine Oil in the ratio of 2 : 3 by weight to get a clear and transparent pine oil concentrate.

How to Use:

• Take 40 Kg FX PAN 80 and add 60 Kg of Pine Oil to it.
• Stir well to get a clear and transparent Pine Oil concentrate
• Now your Pine Oil Concentrate is ready to be diluted with water in the ratio of 1:20 to 1:30 depending on the thickness required
• A thick stable milky white emulsion is formed

Additional Information:

• Delivery Time: 2 days

• Free from impurities
• Tamper proof packaging
• High purity

• Active content: 100%
• Appearance: Pale Yellow to Brown Liquid.
• Solubility: Soluble in most oils and organic solvents.

• Emamectin/ Abamectin Technical – 4 to 5 %
• DMSO / DMF / ACETONE – 50 %
• DIKO EMA ( Emulsifier ) – 5 to 8 %
• Neem / Karanja Oil – 35 to 40 %

Additional Information:

• Production Capacity: 5000 Kgs per Day
• Delivery Time: 2-5 Days

• Purity
• Highly effective
• Accurate composition

• We are regarded as one of the most significant players in the manufacturing and supplying Cutting Oil Emulsifier.
• Our Soluble Cutting Oil Emulsifier is known for its stable thick milky white emulsion. Our Emulsifier is Eco friendly (rosin and Phenol free) and the resulting cutting oil is suitable for water hardness of 10000 ppm. Also we can adjust the Emulsifier based on base oil to be used.
• It a very unique product manufactured by us much better than the already existing emulsifiers in the market. Our Cutting Oil Emulsifier ( DIKO ECOIL ) gives an clear stable Concentrate and a thick milky white stable emulsion when mixed with water.
• DIKO ECOIL is mixed with BASE Oil at a dosage of only 8 to 12 % to get a Clear Concentrate.
• This concentrate can then be mixed with water in the ratio of 1 : 20 to get a thick milky white emulsion.

• Dosage only 8 to 12 % . (Take 90 Kg Base Oil and Mix it with 10 Kg Emulsifier )
• Fully Non Ionic Product
• Hard water stable
• Emulsion is stable for a long period
• Low Foaming emulsifier
• Works even at elevated temperatures.
• Rosin and Phenol Free
• Contains high level emulsifiers
• Rust protection
• Excellent cooling
• Superb Lubricity due to high content of Oil and Low Dose of Emulsifiers
• Good surface finish

• Metal grinding
• Cutting operation
• Drilling
• Milling

• Contains high level emulsifiers
• Rust protection
• Excellent cooling
• Lubricity
• Stable emulsion with water at high dilution
• Good surface finish

• Pure
• Long shelf life
• Air tight packaging

• Active content: Propreitory
• Appearance: Pale Yellow to Brown Liquid.
• Solubility: Soluble in most oils and organic solvents.

• Take 90-92 kg MTO Now add 8-10 kg of our emulsifier DIKO KMT 20 slowly under stirring.
• Continue stirring for 10-15 minutes.You will get transparent clear emulsion.

Additional Information:

• Production Capacity: 10,000 Kg per day
• Delivery Time: 2 Days